5
Mechanical Principles
It is useful to understand the Multiglider’s mechanical principles, in order to avoid
misusing. This is why we are noting the most important characteristics in this opera-
tion manual.
The sliding camera mount is connected (via a belt) to the counter weight sledge.
The weight of both units always has to be equal. If the weight of camera is e.g. 10Kg,
the counter weight sledge must weigh the same. Add or remove counterweights on
counter weight sledge if necessary. The weights are available in different sizes
(width) for best adjustment.
Both units are perfectly adjusted if loaded sledge is not moving when rail is in vertical
or diagonal position.
Set Up
Adjust tripod to requested height and se-
cure safely. Dismount Fluid Head (if
mounted) and put central pivot section of
Multiglider on top of tripod. Secure with
locking knob of FluidHead.
Level central pivot section by adjusting
each leg of tripod.
Right fitting of rail in central pivot section. Tilt-Brake for Multiglider rail holds rail in
requested position.