Panther 1350, Инструкция/Каталог запасных частей, Страница: 48 / 103

P
ANTHER
MODEL PAGE NO.
1350/1650 37
0 to 90` on either side and total 180` graduation are give on
surface slide to set compound slide at desire angle.
Tool post (41) is provided on top face of compound slide. This
tool post is index able type, 4 way tool posts.
3.7 Tail stock
Tail stock is clamped on bed guide ways by tail stock clamping
lever (46). You can adjust clamping pressure by loosening or tightening
of tail stock clamping stud nut. Clamping of tail stock on lathe bed is
cam operated- easy locking system.
Two setting bolts (47) are provided either side of tail stock to shift
the tail stock assembly in transverse direction. This setting is become
useful in taper turning operation of long job in between centre settings.
Tail stock spindle moves through hand wheel (45). Tail stock
spindle clamping lever (44) clamps, Tail stock spindle in tail stock
body.
Tool tray (48) is provided on top face of tail stock assembly.
3.8 Least Counts of all hand wheels.
Longitudinal movement by Apron hand wheel (31) and least
count is 0.200 mm/Rev.
Transverse movement by surface hand wheel (38) and least count
is 0.020 mm/Rev. Tail stock spindle movement by hand wheel (45) and
least count is 0.040 mm/Rev. Compound slide hand wheel least count is
0.020 mm/Rev.