Toaster Collection Operating Manual – CT1
Tel: 0800 0461570
Fax: 0800 0461571
Web: www.pantheonce.co.uk
Email: [email protected]
Pantheon Catering Equipment
Vulcan Works, Dixon Street,
Bolton, BL6 7PH
Introduction
Thank you for purchasing a Pantheon Catering Equipment product. In this booklet you will find
instructions for the safe operation of the product so please read carefully and retain for future
reference.
Warnings and Precautions
The following warnings and precautions are important and must be observed:
Ensure voltage and frequency power requirements for the Conveyor Toaster match that of
the supply.
The machine must be earthed when used. There is a danger of electric shock if it is not
earthed.
In case of emergency, please turn off the power switch and unplug the machine.
If the electric wire becomes damaged, a qualified engineer or the manufacturer must
replace it.
Pantheon Catering Equipment is not responsible for any accidents or faults caused by amendments
made to the machine or improper use by the user.
Technical Data Specifications:
Model
CT1
Voltage (V)
220-240V 50Hz
Weight (Kg)
20
Dimensions (mm)
370w x 420d x 430h
Specifications are subject to change. Please check the rating label on the back of the machine.
Installation
Positioning
To ensure there is sufficient space for ventilation please adhere to the following clearances
above 100mm
rear 300mm
left 100mm
right 100mm
Ensure there is enough space at the front of the toaster to allow easy access to the control panel and
the toast feed ramp.
Set Up
The installation of the unit must be performed by a qualified technician only.
Place the device on top of a solid, even, safe and stable surface that tolerates the weight of
the unit.
Ensure no flammable products are placed near the unit as it will get hot.
Position the device appropriately so that the plug is always accessible.
Ensure the unit isn’t placed close to any water.
1
