USING THE TRANS-FLASH CARD
USING THE TRANS-FLASH CARD
C
H
2
29
C
H
2
28
INSTALLING THE TRANS-FLASH CARD
1
With the miniSD card slot
opened, and the gold
contacts facing up, insert the
miniSD card into the slot.
2
Push the card in until it it clicks into place.
Close the miniSD card slot.
REMOVING THE TRANS-FLASH CARD
1
Open the miniSD card slot.
Use your thumb to press and
release the miniSD card.
It will pop-out to allow you to
remove the card.
2
Remove the card and close the miniSD card slot.
When you insert the Trans-Flash card, make sure contact
terminals face down.
File names storing each media in the Trans-Flash card are
“my-pic” for pictures, “my-video” for videos.
Do not remove the Trans-Flash card while reading or writing
files. Otherwise it could be damaged.
Trans-Flash card is recognized as a mobile disk when
connected to a personal computer.
When disconnecting from PC, please remove the USB
storage equipment on your PC. Otherwise, the stored files
on the Trans-Flash card could be damaged.
l
l
l
l
l
To prevent possible damages, please keep Trans-Flash card slot
closed at all times whether Trans-Flash card is inserted or not.
To make sure the proper function of removable memory, please
use the Trans-Flash card of SanDisk.
To install your miniSD card, use the following steps:
The miniSD card stores sounds, images, photos and videos, music,
and other files.
To remove the miniSD card, use the following steps: