10
11
Charging via the computer/laptop
1. To charge the Panta® Pocket Cam using your computer/laptop, plug the Micro-
USB connector end of the supplied USB cable into the charging port of the camera.
(Figure B) Once the Micro-USB cable is plugged into the Panta® Pocket Cam , plug
the other end of the cable into the USB port of your computer/laptop. (Figure C)
NOTE:
The USB port can be located on either the left or right side of your computer/
laptop.
2. While the camera is charging via your computer/laptop, the indicator light will
alternately flash red and green.
NOTE:
If Panta® Pocket Cam is charging via your computer/laptop, it will NOT
record.
3. When charging is complete, the indicator light will turn OFF. Charging using a wall
outlet
Charging using a wall outlet
1. Plug the Micro-USB connector end of the supplied USB cable into the charging port
of the camera (Figure B).
2. Once the camera is successfully attached to the camera clip (Figure E+F), plug the
other end of the cable into a wall adapter (not provided), then plug the adapter into
the wall outlet (Figure D).
3. While the camera is charging in a wall outlet, the indicator light will flash red every
3 seconds, indicating that the camera is charging properly.
NOTE:
If the Panta® Pocket Cam is charging via a wall outlet, the camera will
CHARGE and RECORD at the same time.
4. When charging is complete, the indicator light will turn solid red.
RECORDING A VIDEO
1. Insert the microSD card into the Panta® Pocket Cam SD card port (Figure G).
NOTE:
The microSD card is already installed in the unit. If the microSD card is NOT
installed in the unit while power is on, the indicator light will flash green 8 times and
then the unit will turn off.
2. To turn on the Panta® Pocket Cam, press and hold down the power button for 4
seconds. The camera will automatically start recording as soon as it is turned on and
detects a movement.
NOTE:
The LED light will light up solid red when switched on and recording. The
Panta® Pocket Cam automatically records on loop and overwrites earlier shots.
After 1 minute of no movement being detected, the Panta® Pocket Cam will remain
M18205_PantaPocketCam_Manual_A5_20181031_KS.indd 11
29.11.18 11:00
