Pansat 250SM, Руководство пользователя

Страница: 27 / 33

ⓒ
2007 by Panarex Electronics
27
data transfer period until “Please wait for saving” message disappeared. Interruption of data transfer could damage the
receiver’s flash memory chip which makes the receiver dead and void warranty.
5.2 Factory Setting
Once the Factory setting is selected and type password by pressing 4-digit numeric keys followed by OK key, whole
parameters will be changed to the default value written in the factory. If you do not want to continue this mode, press
EXIT key before you enter password.
Common password is “0000”. In case selected password is forgotten, call Pansat’s dealer to get factory master
password.
5.3. System Information
Show the information of model name, data and version of STB(Set Top Box).
6. Channel List
▪ You can see the channel list as shown in the above figure by pressing OK key
▪ To watch another channel, move the cursor to the channel you want by using ▲▼ PG ↑ PG ↓ and press OK key
▪ If favorite channels are saved, the list is changed from channel list TV to favorite list.
▪ Pressing TV/RAD to change radio list, you can exit from the list menu by pressing EXIT key.