UNPACKING PRINTER
COMPONENTS
Power Adaptor
Power Cord
Adjustment Tool
NOTE:
Please make sure all components below are accounted for and are not damaged before proceeding to
the next step. For damaged or missing components please call
888-
-
8
(USA)
or
+ 6
66 8
(Europe) for assistance.
Printer Cable
Teflon Tube
Filamen t Roll
Glue Stick
Scraper
User Manual
Warranty Card
Printer
. Carefully take the printer out of the box and
place it on a sturdy table.
. Carefully remove all fastening tapes.
NOTE:
Be extra careful when removing tape
from print bed and filament holder cover.
Thank you for purchasing our PanoSpace I D Printer . We pride ourselves in having the most innovative products
on the market with cutting edge technology that is easy to use. We are dedicated to making the most enriching
learning experiences for you and hope you have as much fun using it as we did creating it!
CAUTION!
DO NOT TOUCH THE EXTRUDER WHILE HEATING OR PRINTING.
AN ADULT MUST BE PRESENT WHEN USED BY CHILDREN UNDER 12.
KEEP HANDS AWAY FROM ALL MOVING PARTS.
DO NOT RETURN THIS PRODUCT BACK TO THE
STORE PLEASE CALL
888-
-8 8
(USA) OR
+ 6
66 8
(EUROPE) FOR QUESTIONS,
SERVICE & OR ASSISTANCE
Apply two thin layers of glue
to the print bed with the supplied
glue stick before continuing.
PRINTING FROM THE PRINTERS TOUCH SCREEN
We recommend you do a test print first from the preselected D models installed directly in your PanoSpace
printer to familiarize yourself with our product.
NOTE:
Your print bed should already be leveled and ready to
print. Sometimes shipping can cause a tweak in the bed, if that is the case please refer to the user manual for
leveling instructions.
DOWNLOAD & INSTALL SOFTWARE
print bed with the supplied
scraper tool. Then click the “Done”
button.
6
Peel the base from the printed
model.
Your D model will start to print
at this stage. The screen will also
have a progress bar to indicate the
progress of the print.
Go to the main menu on the
printer’s touch screen & click the
“Print” button. Choose any of the
D models from the list.
Confirm your selection by pressing
the “Print” button.
Go to www.3dpanospace.com & download PanoBuilder installer.
Choose PanoBuilder installer to install software onto your computer.
NOTE:
If you see the security window, please choose “Install this driver
software anyway” option.
KNOWING YOUR PRINTER
For detailed information, please read the user manual.
Front
Side
Back
Extruder
Print Bed
Filament Holder Cover
Top Lid
Power Switch
Power Socket
USB Socket
SD Card Slot
Touch Screen
QUICK START GUIDE
PANOSPACE I
MODEL NO. PSPA 6
cover
inside spread
LEFT FILAMENT HOLDER
Open left filament holder cover &
top lid, insert filament through the
right hole on top of the filament
holder as indicated above.
Place filament roll into the
holder & close the filament holder
cover.
Connect power cord to the
power adaptor. Plug it in to
a grounded wall receptacle.
Turn on power switch. The printer
should start the initialization process
at this point.
Then click the “Load filament”
button.
Insert filament through Teflon
tube. Make sure the filament goes
all the way through the Teflon tube.
NOTE:
The Teflon tube is used
just as a guide for the filament.
Follow the instructions on the
screen, & extrude filament until you
see it come out of the print head.
Then click the “Finish” button.
Insert filament into the hole on
top of the extruder & close top lid.
Click the “Adjust” button on
your printer’s touch screen.
LOADING FILAMENT
Connect printer cable from your
computer to your PanoSpace printer.
Turn printer ON.
Open PanoBuilder and click
the “Model” button.
Select model either from
model library or your computer.
Click the “Print” button on the
right of the window.
Confirm the information of the
model to be printed. Apply glue
before continuing.
Your D model will start to
print at this stage.
PRINTING FROM PANOBUILDER
PANOSPACE USA
8 E. Francis St.
Ontario, CA
6
www. dpanospace.com
Customer Service/Tec Support:
US + 888-
-8 8
6
66 8
