4.
Wall Mounting
To mount the antenna to a wall o
r
panel you will need the following supplied parts:
1 x Antenna
2 x Wall Bracket Plates
4 x Screws
4 x Washers
4 x Spring Washers
2 x Nuts
The antenna
must be
mounted with the cables exiting downwards
and should not be fitted directly on to metal walls.
Fit one half of the bracket to the antenna using the screws, nuts and washers provided.
Check
the wall / panel
to ensure t
hat drilling in the chosen location will not damage any objects, wires or pipes
within or
behind the panel.
Using the other half of the bracket as a template, m
ark the hole positions
ensuring t
hat they are level.
Drill pilot holes and then increase to
the appropriate hole size for the wall anchors / wall plugs that are being used. Fit the bracket to the wall using appropriate screws
/anchors and
wall plugs
.
Align
antenna
bracket plate with
the wall mounted bracket half
and fasten them together using supplied fasteners. Adjust the angle of the bracket
as required and
tighten securely
.
4.a
4.b
4.c
4.d