Panorama Antennas WMM2G-6-60, Руководство по установке

Страница: 3 / 8

1. Introduction
2. Planning the Installation
3
The WMM2G[G]-6-60 is a range of directional panel antennas for 4G/5G applications requiring support
for 2x2 MiMo with optional GPS/GNSS. Ideal for branch or failover applications the antenna is suitable
for external or internal mounting. The antenna is supplied as standard with a low profile wall mount
bracket and a multi-tilt bracket for wall or mast mounting.
3. Safety Notes
• The antenna is designed to be mounted by a professional installer. Please seek professional advice
from an accredited installer regarding the installation if in any doubt.
• If the antenna will be fitted to an existing mast, please ensure that it will not overload it.
• Ensure that the installation location can be safely accessed with the equipment that you have available.
• If mounting to a wall in a possition which is accessible care should be taken to ensure that no one
comes within 1m (3’) of the antenna during use.
To minimize the effects of surrounding objects, the antenna should be located as far away from other
structures as possible. If fitted with GPS/GNSS the antenna should have a clear view of the sky.
The antenna is directional with a horizontal beam width of around 90 degrees depending on frequency
band. Select a mounting location to ensure that the antenna is facing the direction of the strongest
signal, which may not be pointing directly towards the network base station. The orientation of the
antenna should be vertical with the cable exiting downwards.
A low profile wall mount bracket is supplied allowing flat fitment to a wall with no adjustment. A multi-tilt
bracket is also supplied for mounting to a mast (diameter <60mm [2.36”] ) or wall – this allows adjustable
vertical and horizontal tilt. Alternatively, if the antenna is fitted to a panel with rear access, then it can be
secured to the panel using suitable length M6x1 machine screws into the threaded bushes in the
antenna back plate.
Electrical Safety Note
Variants of this product contain an active GPS/GNSS antenna.
Rated voltage: 3-5VDC Rated current: 20mA maximum.
The supply to this device must be provided with overcurrent protection
of 1A maximum.