Panorama Antennas MiMo, Руководство по установке

Страница: 8 / 12

8
1 - To Wall Mount this antenna you will need:
1 x Antenna
2 x Wall Bracket Plates
4 x Screws
1 - To Desk Mount this antenna you will need:
1 x Antenna
1 x Desk Mount
2 - Fix the mounting bracket to the external wall or other flat surface using suitable screws and wall plugs
(not supplied).
3 - Fix the mounting bracket to the antenna using the washers and screws supplied.
4 - Fix the antenna to the wall mounting bracket
5 - Secure the antenna in place and waterproof the exposed connections. Fully tighten the mounting
hardware. If exposed the RF connector joint should be waterproofed with a weatherproof electrical tape
(self amalgamating type is recommended) allowing a significant overlap of each turn and ensuring that
the overlap is in the opposite direction to predicted water fall.
2 - Using the Antenna Internally
When using the antenna internally, take care to ensure that the antenna or cables do not cause a trip
hazard. The antenna can be fitted to the supplied desk stand for internal use. Optimum performance will
be achieved with the antenna facing a window in the direction of best network signal strength.
3 - Mounting and dismounting the antenna to the desk stand
Once you have determined the desired mounting location and orientation you can mount and dismount
the antenna to the supplied desk stand following the steps below.
4 x Washers
4 x Spring Washers
2 x Nuts
5. Desk Mounting Instructions