INSTRUCTIONS
MODEL:
NOO-E14, VOO-E14
NOZ-E14, VOZ-E14
NOS-E14, VOS-E14
NZS-E14, VZS-E14
Garden lamp
GARD
If the product is mechanically damaged or connected unprofessionally, guarantee cannot be allowed
Before using or installing the product, kindly read the instructions and follow safety rules. Installation should
be provided by qualified person or company.
Thank you for choosing the item of company PANLUX s.r.o.
Technical data
Power supply: 230V~50Hz
Power: max. 60W, incandescent lamp
max. 11W, CFL energy saving
Lampholder: E14
Protection class: I.
IP Protection: IP44
Location: exteriors
Material: aluminium, plastic
Notice
Before using, check the product and make sure there is no
damage, otherwise do not use it.
Before every manipulation assure that mains electrical supply
is disconnected.
In case of damage do not repair or disassemble the product.
Before replacing the light source switch off the light and let it
cool down.
Kindly use only recommended light sources.
Infringement of any instruction mentioned in instruction
manual can cause harm to health or property.
Principle of PIR sensor
PIR sensor receives infra-red waves emitted by objects in reach radius. With movement in the detection area sensor
notices the change and initiates trigger order „Light on“ for adjusted time.
Reach setting (sensitivity) – SENS (max. 7m)
Reach is to be understood as the area traced out by angle of detection and min. to max. available distance from sensor.
Reach can be changed by knob.
Time setting (switch-off delay) – TIME (10s (±5s) to 4min (±1min))
The countdown of adjusted time begins after last detected movement. We recommend setting the function on mini-
mum during functional test.
Twilight level (response threshold): aprox. 10lx
UM_GARD_110221
Installation
Stated information may differ according to position.
Position marked - or
applies to minimum and position marked
or
applies to maximum.
+
Technical data can be changed without previous notice.
All right reserved.
NOS-E14, VOS-E14, NZS-E14, VZS-E14
For the best functional results, move toward the sensor (see to pic. 7).
The incorrect function of the product can be caused by interruption of electromagnetic field, small temperature difference
between moving object and surroundings, reflection (e.g. strong luminous source).
PIR sensor ( NOS-E14, VOS-E14, NZS-E14, VZS-E14)
Additional load: max. 200W (incandescent lamp)
max. 60W (CFL energy saving)
Angle of detection: 90° - horizontal, 60° - vertical
Reach: max. 7m (SENS), adjustable
Time setting: 10s (±5s) to 4 min (±1min) (TIME), adjustable
Twilight level: aprox. 10lx
terminal box connection
(see to pic. 2)
1
3
2
4
5
6
60°
90°
max.7m
7
0W
-
-
-
PIR
PIR
230V~50Hz/16A
-
230V~50Hz/16A
0W
<1W
<1W
Consumption in standby mode
M
odel
Operating temperature
Socket
Sensor
1
2
2
3
Terminal block
NOO-E14/VOO-E14
NOZ-E14/VOZ-E14
NOS-E14/VOS-E14
NZS-E14/VZS-E14
-15˚~+50˚C
-15˚~+50˚C
-5˚~+50˚C
-5˚~+50˚C
Dimensions
100x100x360mm/100x100x760mm
100x100x360mm/100x100x760mm
100x100x360mm/100x100x760mm
100x100x360mm/100x100x760mm
