Warranty voids if the product is mechanically damaged or connected unprofessionally.
Before using or installing the product, kindly read the instructions and follow safety rules. Installation should be provided by
qualified person or company.
Thank you for choosing the item of company PANLUX s.r.o.
Technical data
Location: exteriors
Material: plastic PP/PMMA
Notice
Before using, check the product and make sure that it is not damaged, otherwise do not use it. Before every manipulation
make sure that mains electrical supply is disconnected. In case of damage do not repair or disassemble the product. Before
replacing the light source switch off the light and let it cool down. Kindly use only recommended light sources.
Infringement of any mentioned instruction can cause harm to health or property.
Principle of PIR sensor
PIR sensor receives infra-red waves emitted by objects in reach radius. With movement in the detection area sensor notices
the change and initiates trigger order „Light on“ for adjusted time.
Reach setting (sensitivity) – SENS (max. 7m, adjustable)
Reach is to be understood as the area traced out by angle of detection and min. to max. available distance from sensor.
Reach can be changed by knob.
Time setting (switch-off delay) – TIME (10s (±5s) to 4min (±1min), adjustable)
The countdown of adjusted time begins after last detected movement. We recommend setting the function on minimum
during functional test.
Twilight setting (response threshold) – aprox. 10lx
We recommend setting the function on maximum during test.
Stated information may differ according to position and installation height.
Position marked - or
applies to minimum and position marked
or
applies to maximum.
+
INSTRUCTIONS
ENG |
MODEL:
NOO-E14, VOO-E14
NOZ-E14, VOZ-E14
NOS-E14, VOS-E14
NZS-E14, VZS-E14
GARD
NOS-E14, VOS-E14, NZS-E14, VZS-E14
For the best functional results, move toward the sensor (see to pic. 7). The incorrect function of the product can be caused
by interruption of electromagnetic field, small temperature difference between moving object and surroundings, reflection
(e.g. strong luminous source).
UM_GARD_150707
Technical data can be changed without previous notice.
All rights reserved
terminal box connection
(see to pic. 2)
2
230V
~50Hz
IP44
SENS
max.
7m
TIME
10s
( ±5s)
~
4min (±1min)
LUX
cca
10lx
E14
MA X
60W
MAX
11W
1,5mm
2
max. 60W
max. 200W
Installation
PIR SENZOR
1
3
5
4
6
H
2
O
H
2
O
H
2
O
H
2
O
63 mm
63 mm
760 mm
427 mm
270 mm
100 mm
100 mm
187 mm
360 mm
110 mm
7m
7m
2m
90˚
2m
7m
2m
0m