Panio HD1400K, Руководство пользователя, Страница: 4 / 7

4
2
Connect to IR receiver cable, the IR receive signal will emit to “IR OUT” port of the HDBaseT
Receiver.
3
Connect to IR blaster cable, the IR emit signal is from “IR IN” port of the HDBaseT Receiver.
4
AUDIO OUT (COAX, L/R).
5
POWER switch.
6
EDID DIP switch.
7
HDMI INPUT port & Loop out port.
8
HDBT OUTPUT port (1~4).
9
Link Signal Indicator lamp (Green)
10
Data Signal Indicator lamp (Orange)
11
DC 24V
HDBaseT Receiver Panel
1
Power LED.
2
SERVICE port: Firmware update port.
3
DC 24V/1A power supply input port. Note: The Matrix supports POC function, it means that either
transmitter or receiver is powered on by 24V/1A power adapter, the other one doesn’t need
power supply.
4
RJ45 connector for connecting the HDBT OUTPUT port of Matrix with a CAT cable.
5
▪
Illuminating: Matrix and Receiver are in good connection status.
▪
Flashing: Matrix and
Receiver are in poor connection status. ▪ Dark: Matrix and Receiver are not connected.
6
▪ Illuminating: HDMI signal with HDCP. ▪ Flashing: HDMI signal without HDCP. ▪ Dark: No HDMI
signal.
7
HDMI output port, connect to HDMI display device such as TV or monitor with HDMI cable.
8
Analog audio output port. The audio is extracted from HDMI signal.
9
Connect to IR receiver cable, the IR receive signal will emit to the
“
IR OUT
”
port of the Matrix.
10
Connect to IR blaster cable, the IR emit signal is from the
“
IR IN
”
port of the Matrix.
11
RS-232 Port