Panio CH8820K, Руководство пользователя, Страница: 7 / 8

7
Switching operation
Switching with industry 2-key fast switching, first press the input button and then select/press output
button. Details are as follow:

There are 8 input buttons, 8 output buttons. First press MENU to show SWITCH interface, then
can continue the next switching step.

Press input number at the INPUT area, the input button will light up with blue light.

Then press output number at the OUTPUT area, and the output button will light up. Users also
can press the UP button to realize 1 to ALL switching.

If need to cancel switching, can press the button again to cancel. Users also can press the DOWN
button to cancel all outputs.
Scene Operation

The system can save 40 scenes, after switching successfully in the SWITCH interface, press MENU
button and switch to SCENE interface.

Enter the wanted scene save number(1~8), then press SAVE. If want to reload the saved scene,
press the scene number and press RECALL button

Note: When the scene save/recall is made through the front button, the maximum number of
save/recall is 16.
Setup Operation

First press MENU switch to SETUP interface, then continue next operation

Via SETUP, it can realize IP address changing, in SETUP interface can use UP/ DOWN button to
position, enter the needed IP address from the left button side, then press SAVE button to save
View Operation

Via MENU button switch to VIEW interface, will display the current switching status

COM Control command
RS232 cable with straight-through connection (USB-RS232 can be used directly to control)
Communication protocol:
Baud rate: 115200
Data bit: 8
Stop bit: 1
Check bit: None
Commands Explanation Function description
YAll. Y=1,2,3,4......
Switch Input Y to all the outputs
Eg. “ 1ALL. ” means switch input 1 to all outputs
All1. One to one
Switch all the channels to be one to one. Eg.1->1, 2->2,
3->3……
YXZ.
Y=1,2,3,4......
Z=1,2,3,4...... Switch Input Y to Output Z
Eg. “
1X2.
” means switch Input 1 to output 2
YXZ&Q&W.
Y=1,2,3,4......
Z=1,2,3,4......
Q=1,2,3,4......
W=1,2,3,4......
Switch Input Y to Output Z, Q, W
Eg. “ 1X2&3&4. ” means switch Input 1 to Output 2, 3, 4