Temperature setting
Set the temperature by positioning the thermostat (n°4 on picture) to the desired
temperature. The orange pilot light (n°3 on picture) switches on if a higher level
of temperature is required and switches off when the same is reached.
It is not necessary to leave the device switched on at full power. It is necessary
to adapt the temperature to products to be cooked to limit the energy con-
sumption.
If your food sticks on the plate, reduce the temperature of the thermostat
Stopping the appliance
Set each control knob (n°1 and 4 on picture) on 0: the appliance is no longer
functioning.
Let the device cool
Disconnect the power cable.
Clean the appliance. (see 6. Cleaning)
Grease the plates
d) Breakdown / repair:
In case of breakdown or of damaged part, please call your after-sales service and
confide any technical operation to qualified person.
When you contact the after-sales service of your distributor or your store, give him
the complete reference of your device (commercial name, type and serial number).
This information appears on the visible descriptive plate behind the device.
6. CLEANING AND MAINTENANCE
Disconnect the device.
- Let cool completely the device before any technical intervention or cleaning.
- For cleaning of plates, only use non-abrasive products, clean regularly the external
walls of your device with warm water and wash liquid: avoid the abrasive towelling.
Rinse your device with a wet sponge.
- Never clean the device under a water jet, the infiltrations would risk to damage it in
a irreparable way.
- Never immerse the device, the cord or the plug in the water or quite other liquid to
avoid any electric shock.
- During a prolonged non-use, we recommend you strongly to keep the device
shielded from the humidity.
- The drip tray can be washed in a machine
6
7. TECHNICAL SPECIFICATIONS
Wires colours correspondence
Phase Brown / Black / Grey
Neutral Blue
Earth Yellow-Green
The equipotential connection marked by this symbol must be linked with the
equipotential conductive connection of your installation by means of a minimum con-
duction of a 2.5 mm² section.
8. NORMS AND LEGALS DISPOSALS
The device is conform to :
IEC/EN 60335-1
IEC/EN 60335-2-38
EN 55014-1 + 55014-2
EN 61000-3-2 + 61000-3-3
9. ELIMINATION OF THE ELECTRIC AND ELECTRONIC WASTE
The device respects the directives:
2002 / 96 / CE ( DEEE) N°34270064800021
2002 / 95 / CE ( ROHS)
2006/95 CE
2004/108 CE
Reach rule
Never put the device among household waste.
The device must be put down in a centre of recycling for the electric equipments.
7
Model
PANINI XL
Outside dimensions
410x620x340 mm
Cooking surface
360x360 mm
Weight
34 Kg
Power
3600 W
No element
2
Current
15.5 A
Voltage
220-240 V N~
