Pani BP2,5CT, Руководство пользователя, Страница: 11 / 24

Stage Projector BP 2,5 CT Pani Projection and Lighting Vertriebs GmbH
3.5) 28mm DIN- Stud with Welded Mounting Plate
Order Code: 12039
4.1) Mechanical Construction of the Projector
The light sheet metal housing with double wall heat isolation system is mounted in a
stable support yoke (8). Fine adjustment (2) is accomplished by means of adjustable
telescoping rails on either side (7). The image plane with slide carrier can be rotated
+/- 90° by losening the clamping lever (9) on the upper part of the housing. The 18x
18 cm diapositives individually can be exactly adjusted with the aid of adjustment
screws. The slide carrier is held in exact position by means of a spring loaded
locking pin (11). By lifting the ball knob (11), the slide may be freely moved into the
new position where it locks into position automatically.
4.2) Electrical Assembly of theProjector
The complete electrical section is located in the black finished lower housing area; It
is mounted to the green main housing with 4 screws.
4.3) Slide Carrier and Slide Cooling Fan
The slide cooling fan has two mounting configurations (It is mounted with 2 captured
hex head screws- No. 4 hex wrench included):
The upper position, closest to the slide, provides optimum cooling, the slide carrrier
can however be rotated only +/- 6°.
When choosing the lower position, the slide carrrier can be rotated ± 90°.
ATTENTION: Slide cooling with the fan in the lower position is less efficient!
POSITION NUMBERS SEE PAGE 4
11