PANHANS Ultimo-Touch 245/100, Руководство по эксплуатации, Страница: 64 / 71

BA_PH_245-100-300_EN_06-22.docx
64
20 Options and Accessories
In the following tables you will find available options and accessories to upgrade your machine. You can find
general spare parts in our online shop on

https://www.hokubema.com .
Use only the tools, accessories and spare parts specified by the manufacturer. The use of other
tools, accessories or spare parts may cause injury to persons and damage to the machine. The
manufacturer accepts no liability for any damage resulting from the use of tools, accessories
or spare parts not specified by the manufacturer or from additional components supplied by
third parties!
20.1 Technical Extensions
Article Description Art.-No.
ZEROMASTER Calibration device for exact zero point height setting from the milling
tool to the table top.
2205
SWIVEL RANGE OF THE
S/- 45,5° 16
Instead of +45.5° to -5° for the standard model. 4541
MOTOR 16 Motor 7.5 kW (10 hp) instead of 5.5 kW. 4271
EXTENDED
SPEED RANGE 17
From 1500 ... 12000 rpm (instead of 1500 ... 10000 rpm) via 7.5 kW mo-
tor, with 11 kW FI, incl. oil lubrication of the milling spindle bearings.
4862
20.2 Table Systems
Article Description Art.-No.
TURNTABLE 18 This allows the milling fence (type 301 and 311) to be rotated 360° on
the machine tables with 1100 x 760 mm table top.
4658
SLIDE PLATE FOR TABLE
TOP 1100 X 760 MM
With coated surfaces. For fast, comfortable and tool-free adjustment
to different tool diameters up to max. 240 mm, incl. front table insert
with quick lock up to tool diameter 155 mm and rear insert for closing
the table opening. Can be used instead of the standard table insert
rings (not in combination with rotary table art. no. 4658).
4467
SLIDE PLATE FOR TABLE
TOP 1340 x 800 MM
Similar to Art.-No. 4467, but for larger table (availability on request!) 4660
EXTENDABLE
FRAME SUPPORT
FOR TABLE TOP
1100 X 760 MM
Total length approx. 1375 mm, extension depth approx. 892 mm from
the centre of the milling spindle, smooth-running, guided in separate
bearing blocks on the side of the machine table.
4232
TABLE EXTENSION
ON BOTH SIDES
For table top 1100 x 760 mm , Total length 2300 mm, consisting of 2
pieces of finely planed cast iron table tops as extension each on the
left and right of the standard machine table, with smooth-running
frame support approx. 892 mm, extendable to the front.
4465
TABLE EXTENSION
ON BOTH SIDES
For table top 1340 x 800 mm , Total length 2500 mm, consisting of 2
pieces of finely planed cast iron table tops as extension each on the
left and right of the standard machine table, with smooth-running
frame support approx. 970 mm, extendable to the front
4215
Continuation see

next page
16 Only for version 245|100
17
Only for version 245|200 and 245|300
18 Not available for version 245|300 (due to electromechanical clamping of the milling fence)