Polar Bear III HD Mechanical Attachment Bracket Installation Manual
9910031 Rev F
7
5 Degree Mechanical Attachment location and Mechanical
Attachment Bracket Installation
Step 2: Install the Mechanical Attachment
1.
Install the Mechanical Attachment once it has been placed appropriately. Consult the
manufacturer’s
installation instructions and specifications regarding the proper installation and
flashing of the Mechanical Attachment.
Step 3: Secure the Mechanical Attachment Bracket
1.
Once the Mechanical Attachment is installed you can complete the rest of the Mechanical
Attachment assembly. Attach the L-Brackets/Standoffs to the threaded stud on the Mechanical
Attachment. Finger-tighten for now. (
Figure 3, 4
)
2.
With the Mechanical Attachment shown as in the figures below, attach the Mechanical
Attachment Bracket to the L-Bracket. Finger-tighten the hardware for now. (
Figure 3, 4
)
Figure 3 OMG/Anchor Products: Attach the L-Brackets to the threaded stud on the
Mechanical Attachment
Mechanical
Attachment
Bracket
Ballast Tray
L Bracket
Mechanical
Attachment
stud
