www.panel.it 19
19
4.3 HDD-SSD installation
4.4 PCI module installation
The onboard PCI slot, labeled as “PCI_SLOT1”, supports 5V 32
-bit PCI cards. It is not compatible with PCI cards
requiring 3.3V signaling.
1)
Remove the PCI rear cover and the motherboard rear cover.
2)
Unscrew the three screws that lock the bracket and the card holding plate.
3)
Pull off the card holding plate and the bracket.
4)
Insert the PCI card and the card holding plate, then lock them with the three screws removed before.
5)
Replace the PCI rear cover and the motherboard rear cover.
Rear covers Bracket Card holding plate Bracket removing
Unplug the two SATA cables. Then,
unscrew the two screws marked above
(in this image one of the two screws is
hidden by the wiring).
On the sides of the drive bay there are
two more screws that lock the SSD unit
SATA SSD installation area
