INSTALLATION INSTRUCTIONS PN318F
For Technical Support: www.panduit.com/resources/install_maintain.asp
Page 2 of 4
Tethered Cap option for sealing Industrial
Jack when not in use with Industrial Plug.
Properly orient jack as shown and insert
into Bulkhead until it clicks into position.
Click
5
(Enclosure wall removed from views for clarity)
6
7
(OR)
Shielded Jack
(For CJSI5E88T)
(For CJI5E88T)
UTP Jack
Enclosure Wall
3
Insert Bulkhead into prepared opening from outside of
enclosure. Secure with Keyed Thrust Washer and Nut
on the inside of enclosure. Torque Nut to 20 in-lbs.
4
Terminate jack.
See
PANDUIT
Instruction Sheet PN120* for jack
Termination Instructions.
Inside of Enclosure
Outside of Enclosure
or Outlet Plate
Min. thickness - .035" (20 guage)
Max. thickness - .090"
Installation for Industrial Jack
* Denotes revision level of Instruction Sheet.
