www.panduit.com
2
2. With pliers (recommend PANDUIT part # CT-100), clamp down on copper contact, and then
clamp down on the cover to secure the assembly in place.
3. Repeat steps 1-2 until all termination jacks on panel(s) have a grounding wire attached.
Attaching Jumper Kit to the Rack
1. Use a cleansing pad to scrub both the ESD port and the rack rail. (Use of an AntiOx to cleanse
the contact is additionally recommended).
2. Next, attach the bent lug to the rail of the rack with thread-forming screws. (Once again, use of
an AntiOx to cleanse the screws is recommended).
