SmartZone Gateway EPA064 User Manual
-
16
-
Initial Setup
Default Settings
The SmartZone Gateway unit in factory default condition has the following network con-
figuration. Advanced users may wish to make use of these settings to access the Gate-
way unit's Web Management Interface immediately and proceed with configuration.
Users who do not know how to do this should proceed through this section for inform-
ation on how to configure the Gateway unit.
IP Address
192.168.0.253
Subnet Mask
255.255.255.0
Default Gateway
192.168.0.1
Web Management Address
http://192.168.0.253/
Default username
admin
Default password
admin
Note
: Password entries are case-sensitive.
Connecting to the Web Management Interface
The SmartZone Gateway monitoring solution can be configured entirely using the built-
in Web Management Interface.
You may need to change the IP address of the PC to connect to the Web Management
Interface for the first time. The following section details how to change the IP address
and connect to the Web Management Interface.
Changing your PC's IP Address
Note
: Instructions refer specifically to Windows 7. Please refer to your operating system
documentation if you are not using Windows 7.
1. Click the Windows button and select
Control Panel
.
