Panduit PViQ, Руководство пользователя, Страница: 11 / 20

PViQ Switched POU
Version 1.0 11
Network Setup
Network Overview
This product comes preconfigured with a default IP address set. Simply connect to the POU and access
the web page with your browser.
Default IP Address
The PViQ Switched units have a default IP address for initial setup and access to the unit if the assigned
address is lost or forgotten. Once an IP address is assigned to a unit, the default IP address is no longer
active. To restore the default IP address, press and hold the reset button located below the network
connector for 20 seconds. The idle and activity lights on the network connector will both light up when the
IP address has been reset. The reset button is accessed through the white, circular hole located below
the Ethernet jack.
Note: Pressing the reset button under the network connector will restore the default IP address and will
also clear all password settings.
The Configuration page allows you to assign the network properties or use DHCP to connect to your
network. Access to the unit requires the IP address to be known, so use of a Static IP or reserved DHCP
is recommended. The default address is shown on the front of the unit:
IP Address: 192.168.123.123
Subnet Mask: 255.255.255.0
Gateway: 192.168.123.1
Initial Setup
1. Connect POU to your computer using a crossover cable.
2.
On your computer, go to “Start > Settings > Control Panel > Network and Dial Up
Connections.”
3.
Right Click on “Local Area Connection” and select “Properties.”
4. Sel
ect the option to “Use the following IP address” and enter:
IP address : 192.168.123.1
Subnet mask : 255.255.255.0
Default gateway : 192.168.123.1
2
5.
Click “OK” twice.
You can now access the unit using your web browser at the permanent IP address of 192.168.123.1.
2
In some configurations, leaving the gateway field blank may resolve connectivity issues.