9
ES2P
PDU INSTALLATION MANUAL
Section 2 – Installing the PDU
Vertical PDUs
Panduit Vertical PDUs include the following form factors: half-height, mid-height, and full-
height models. This section covers the recommended installation methods
Install Mounting Hardware
Each vertical PDU has two mounting hole locations on the back of the PDU for the
button installation to assist with mounting in a non-Panduit racks. When installing the
mounting buttons, use either mounting hole as a set.
Mounting Button Installation – Outlets Facing the Center of the Rack
1. Align and install the mounting buttons with the screw holes on the face,
opposite of the receptacles.
2. Install the PDU by inserting the mounting buttons into the keyhole slots on the
PDU mounting bracket in the rack.
