CT-980
CT-980: PA25182A01_01
Page: 3 of 7
12-2011
WARNING
Do not use solvents or flammable liquids to clean this tool. Solvents or flammable liquids could
ignite and cause serious injury or property damage.
Do not use tool in or near a highly flammable or explosive atmosphere and/or materials.
WARNING
An incomplete crimp can cause a fire.
Use proper connector and cable combinations. Improper combinations can result in an incomplete
crimp.
The relief valve will sound to indicate a completed crimp. If you do not hear the sound of the relief
valve, the crimp is not complete.
Inspect tool before use. A worn or damaged tool may result in breakage striking the operator or
nearby personnel.
CAUTION
Do not perform any service or maintenance other than as described in this manual.
Injury or damage to the tool may result.
Do not place the tool in a vise. The tool is designed for hand-held operation.
Protect the tool from rain and moisture.
Use this tool for the manufacturer’s intended purpose only.
IMPORTANT INFORMATION
Keep the tool head and tool body portion clean and free from debris. Excessive dirt and grit can
contribute to the premature wear of the tool’s internal mechanical parts. When not using the tool,
regularly check that no foreign matter or debris exists in the open areas between the indenters in the
tool head.
Soap and a damp cloth should be used to clean the tool body.
Always store the tool in its clean, dry carrying case when not in use.
DO NOT
press trigger and release button simultaneously. Damage to trigger linkage may result.
Always point tool away from others.
If the tool is kept in cold temperatures below 23
o
F/-5
o
C for any extended time, it is advisable to return
the tool to room temperature for 1 hour before using.
Avoid dropping the tool. Extreme shock may damage the hydraulic circuit and result in malfunction
of the tool.
Always verify the proper size connector for the conductor, by checking the color code and the
printing on the connector.
