Panduit Atlona Velocity AT-VTP-550, Руководство по установке

Страница: 4 / 12

Installation Guide
AT-VTP-550
4
5 The unit will load a new screen. Change the Device Alias (if needed) to help differentiate
when there are multiple touch panels at a site.
6 Press the SCAN FOR GATEWAYS button.
7 The touch panel will scan for new gateways. Once the correct gateway is found, press USE
Velocity Device Setup
Set Static IP
IP Address
Subnet Mask
Default
Gateway
DNS Server 75.75.75.75
10.0.0.1
255.255.255.0
10.0.0.123
CONTINUE
Velocity Device Setup
Device Alias
URL 0.0.0.0
Velocity Touch Panel 550
SCAN FOR GATEWAYS
SAVE & CONTINUE BACK
Alt. URL
0.0.0.0
Scanning for Gateways
CANCEL
Scanning for Gateways
CANCEL
USE
10.0.0.234
CANCEL
Synchronizing
Waiting for Approval
8 On a network computer, use a browser to log into Velocity.
9 A green message will appear at the top right corner of the screen. Select Buildings .
10 On the buildings screen, press the Synchronize button on the building the touch panel is
located.
11 When the rooms page opens, press the Synchronize button on the touch panel’s room.
12 Press the SAVE & CONTINUE button on the touch panel.