Panduit Atlona OmniStream AT-OMNI-512 Скачать руководство пользователя страница 7

Страница: 7 / 96

AT-OMNI-512

The Atlona

AT-OMNI-512

is a networked AV encoder with two independent channels of encoding for two HDMI

sources up to 4K/60 4:4:4 and HDR (High Dynamic Range), plus embedded audio and RS-232 or IR control pass-

through.

OmniStream

is designed for high performance, flexible distribution of AV over standard, off-the-shelf

Gigabit Ethernet switches in commercial audiovisual applications. The OMNI-512 features the advanced VCx™

codec which delivers 4K/60 4:4:4 video from encode to decode, with artifact-free presentation of computer-

generated content and fast-motion video, and ultra-low latency less than one frame. This dual-channel encoder is

housed in a half-width rack enclosure with front-to-back air flow, and is ideal for high-density, compact installation in

a centralized equipment location.

Introduction

Features

Package Contents

1 x AT-OMNI-512

1 x 6-pin push-spring connector

2 x Wall/table mounting brackets

4 x Rubber feet

•

Best-in-class AV over IP performance and reliability

over Gigabit Ethernet.

• AV encoder for HDMI up to 4K/UHD, plus embedded

audio and RS-232 or IR control pass-through.

• Dual-channel AV encoding.
•

Supports 4K/60 4:4:4 plus HDR formats.

• Advanced VCx codec.
•

High-efficiency coding.

•

HDCP compliance.

•

Ultra-fast switching between 4K/60 video streams.*

•  Integrated Ethernet link testing.
•  Thumbnail preview of encoded video streams.
•  Simplify integration with plug-and-play network

switch compatibility.

•

Local or PoE (Power over Ethernet) powering.

•

Secure content distribution with AES-128 encryption.

• Supports industry-standard, network security

features and protocols.

•

AES67-compatible.

•

Simultaneous OmniStream and AES67 audio

streaming.

•  Enhance AV presentations with visual enhancements.
•  EDID management.
•  Audio processing and pass-through.
•  System management.
•  Compact enclosure.

* Logo / image display features and 1080i video are not supported.

Содержание Atlona OmniStream AT-OMNI-512

































































































Результаты поиска

Содержание Atlona OmniStream AT-OMNI-512

Отзывы:

Похожие инструкции для Atlona OmniStream AT-OMNI-512

Бренды по названию

Популярные бренды

Panduit Atlona OmniStream AT-OMNI-512, Руководство пользователя

Результаты поиска

Содержание Atlona OmniStream AT-OMNI-512

Отзывы:

Похожие инструкции для Atlona OmniStream AT-OMNI-512

Бренды по названию

Популярные бренды