Panduit Atlona Omega AT-OME-EX-TX, Руководство по установке

Страница: 9 / 12

9
Installation Guide
AT-OME-EX-TX
Debug
1. Launch the Analyzer software.
2. Make sure the system is powered and the transmitter and receiver are connected using the
HDBaseT OUT and HDBaseT IN ports.
3. Connect an active source to the transmitter and an active display to the receiver. Set the
source to the highest resolution.
4. Connect a mini-USB to USB-A cable from the FW port, on the transmitter, to a computer.
5. Click the Port drop-down list and select the COM port, then click the Connect button
6. Click Debug in the menu bar.
7. Click the Debug button. Information will appear in the box field if there is any data that can
be logged. The log can be saved to the local computer if needed.