Panduit ATLONA Captivate AT-CAP-FC110, Руководство пользователя

Страница: 18 / 24

AT-CAP-FC110 18
Device Operation
This option sets the maximum zoom limit. Available values are: 2X, 3X, and 4X. The default setting is 3X.
When this mode is enabled, a tracking frame will be displayed on the screen. This function is typically used to
analyze tracking problems in particular scenarios. Available values are: ON or OFF. The default setting is OFF.
This option sets the camera motion detection sensitivity. Available values are: HIGH, MIDDLE, and LOW.
Note that in some cases setting this option to HIGH can result in erratic camera behavior, due to the camera
attempting to track multiple subjects at once. The default setting is HIGH.
This setting determines how much movement is required to cause the camera to reframe. The higher the
number, the smaller the movement that is required to cause a reframe. Available values are: 0 - 8. Lower values
provide more precision. The default setting is 5.
Action of the camera when the smart framing target is lost. Available values are: STAY or PRESET1. When set
to STAY, the camera will remain in the current position. When set to PRESET1, the camera will automatically be
set to the saved preset, in PRESET1. The default setting is PRESET1.
In some cases, the video and audio may not be in sync. While there can be multiple causes for this behavior,
depending on other equipment that is used with the camera, adjusting the this option can compensate for loss
of audio sync with video. Available values are: 0, 62, 124, 186, 248, 310, 372, 434, 496, 558, 620, 682, 744, 806,
868, and 930. All values are measured in milliseconds (ms). The default value is 0.
DZOOMLIMIT
EXPERT MODE
DETECTION SENS.
FRAMING MOVE SENS.
TARGET LOST ACT.
AUDIO DELAY