Installation Guide
AT-VCC-RS232-KIT
4
10 Press the Save Changes button. If the IP was changed, the browser will redirect to the
general ‘Page Not Found’ page.
11 Open any browser on the network and type in the IP address of Velocity.
12 Select the
=
button from the top left corner and select
Sites
.
13 Select the building that corresponds with the room of the VCC.
14 Select the room the VCC is located in. A new screen will take over the window and display
the technology in the room.
15 Select the + button located at the top right corner of the room. A new menu will open.
NOTE:
Connecting the VCC to Velocity can only be done once Velocity has been set
up. View the Velocity Manual for instructions.
16 Press the scan network button. All Atlona devices found will appear in the unassigned list.
17 Select the Add button next to the VCC. A new pop up will appear.
