AT-UHD-SW-510W
23
Configuration of the
RELAY
port can be done through the web GUI or using API commands. Refer to the Application
Programmers Interface, on the Atlona AT-UHD-SW-510W product web page, for more information.
1. Launch a web browser.
2. In the address bar, type the IP address of the AT-UHD-SW-510W.
Configuration using the Web GUI
NOTE:
If using AMS and the AT-UHD-SW-510W is running 2.4.0 or greater, click on the device within
AMS to access the web interface.
3. The
Login
page will be displayed. Enter the required credentials. The default credentials are shown below:
Username:
admin
Password:
Atlona
4. Click the
Submit
button or press the ENTER key on the keyboard.
5. Click
Display
in the menu on the left side of the window.
6.
Locate the
Relay
section.
7. Click the
Enable Momentary Relay
check box to enable relay operation.
8. Click the
Relay Pulse Duration
drop-down list and select the desired duration. Note that some external devices
may not recognize pulse durations less than 1 second. In this case, it may be necessary to select a larger time
interval.
Solution Setup and Configuration Guide