Panduit ATLONA AT-UHD-CAT-8, Руководство по установке

Страница: 3 / 12

3
Installation Guide
AT-UHD-CAT-8
AT-UHD-CAT-8
HDMI
OUT IN
HDBaseT
4 3 2 1 8 7 6 5
POWER EDID
LEARN INT LOCK
1 2 4
HDMI
IN OUT
HDBaseT OUT
3 5 6 8 7
DC 48V IN
FW
LAN
MASTER 1 RS-232 IR
TX RX TX RX
2 RS-232 IR
TX RX TX RX
3 RS-232 IR
TX RX TX RX
4 RS-232 IR
TX RX TX RX
5 RS-232 IR
TX RX TX RX
6 RS-232 IR
TX RX TX RX
7 RS-232 IR
TX RX TX RX
8 RS-232 IR
TX RX TX RX
RS-232 IR
TX RX TX RX
Rear Panel Descriptions
2 5
6
7
1 3 4
1 FW
Connect a mini USB-to-USB cable from
this port, to a computer, to update the
firmware of the AT-UHD-CAT-8.
2 RS-232 / IR (MASTER)
Connect a control system or other DTE
device to this port to control the AT-UHD-
CAT-8.
3 LAN
Connect an Ethernet cable from this port
to the network.
4 HDMI
Connect an HDMI cable from the source
to the IN port. Connect an HDMI cable
from the display (sink) device to the OUT
port.
5 RS-232/IR 1 - RS-232/IR 8
Connect a control system or other DTE
device to these ports for pass-through
zone control. Each of these ports uses
the associated HDBaseT OUT port. This
allows RS-232 command data to be sent
to a display (sink) device connected to a
PoE-compatible receiver.
6 HDBaseT OUT
Connect Ethernet cables from these ports
to PoE-compatible receivers.
7 DC 48V
Connect the included power supply to this
power receptacle.