AT-UHD-CAT-4
13
Installation
3. Execute the
IPStatic
command. This command requires three arguments: the desired IP address of the
AT-UHD-CAT-4, the subnet mask, and the gateway address. All arguments must be entered in dot-decimal
notation. The following is an example:
IPStatic 192.168.1.112 255.255.255.0 192.168.1.1
•
Setting DHCP mode
1. Connect to the AT-UHD-CAT-4 using RS-232 or Telnet.
2. At the command line, execute the
IPDHCP
command using the
on
argument, as shown. All characters are
case-sensitive.
IPDHCP on
Once DHCP is enabled, the unit will be assigned an IP address by the DHCP server (if present).
IP address
Subnet mask
Gateway
, in the web GUI, allows the AT-UHD-CAT-4 to use either DHCP or static IP mode.
In order to access the web GUI, the IP address of the AT-UHD-CAT-4 must be known. Refer to
.
1.
Open the desired web browser and enter the IP address of the AT-UHD-CAT-4.
2.
Log in using the required credentials. The factory-default username and password are listed below:
Username:
root
Password:
Atlona
3. Click
System
in the menu bar.
4. Click the
IP Mode
toggle to switch between the
DHCP
and
STATIC IP
setting. When set to
STATIC IP
, the
IP
,
Netmask
, and
Gateway
fields can be modified.
Setting the IP Address using the Web GUI
5. Click the
Save
button to save the changes.
