background image

5

Installation Guide

AT-HDVS-200-TX / AT-HDVS-200-TX-PSK

1.  Connect an HDMI cable between the HD source and the 

HDMI IN 1

 port on the switcher.

2.  Connect another HDMI cable between another HD source and the 

HDMI IN 2

 port on the 

switcher.

3.  Connect a VGA cable from a VGA source to the 

VGA IN

 port on the switcher.

4.  Connect a 3.5 mm mini-stereo cable from the 

AUDIO IN

 port on the switcher to the analog 

audio source.  The AT-HDVS-200-TX / AT-HDVS-200-TSK-PSK can pass audio either with or 

without a video signal.  Refer to the User Manual for more information.

5.  Connect an category cable, up to 330 feet (100 meters), from the 

LAN

 port on the switcher 

to a Local Area Network (LAN).  Refer to the User Manual for more information.

6.  Connect a category cable, up to 230 feet (70 meters), from the 

HDBaseT OUT

 port on the 

switcher to a PoE-compatible transmitter (not included).  Category cables should use EIA/

TIA-568B termination.

7.  OPTIONAL: Connect an RS-232 control device to the 

RS-232

 port on the switcher.  This 

port is used to control functions of the AT-HDVS-200-TX / AT-HDVS-200-TX-PSK, such as 

volume up/down, display on/off, etc.

 

 

No power supply is required for the AT-HDVS-200-TX / AT-HDVS-200-TX-PSK.  The unit will 

be powered over the category cable, from an HDBaseT receiver.

Refer to the tables below for recommended cabling when using Altona products with HDBaseT.  

The green bars indicate the signal quality when using each type of cable.  Higher-quality signals 

are represented by more bars.

Core

Shielding

CAT5e

CAT6

CAT6a

CAT7

Solid

UTP (unshielded)

N/A

STP (shielded)

IMPORTANT:

  Stranded or patch cables are not recommended due to 

performance issues.

Installation

Cable Recommendation Guidelines

HDMI IN 2

RS-232

RX

R

L

TX

PW

HDMI

INPUT

DISPLAY

v

v

AT-HDVS-200-TX

VOL

HDMI IN 1

VGA IN

AUDIO IN

1

2

VGA

FW

RS-232

HDMI IN 2

LAN

HDBaseT OUT

RS-232

RX

TX

HDMI IN 2

RS-232

RX

R

L

TX

PW

HDMI

INPUT

DISPLAY

v

v

AT-HDVS-200-TX

VOL

HDMI IN 1

VGA IN

AUDIO IN

1

2

VGA

FW

RS-232

HDMI IN 2

DC 48V

LAN

HDBaseT OUT

RS-232

RX

TX

+

1

2

3

4

5

7

6

Содержание Atlona AT-HDVS-200-TX









Отзывы: