AT-HDVS-CAM-HDMI
51
IR Remote and OSD
The AT-HDVS-CAM-HDMI comes with an IR remote control for full control of the camera and use of the OSD menu.
The OSD will display after pressing the MENU button.
IR Remote Control
OSD
OSD
Language
English
Chinese
Setup
Protocol
Auto
Visca PELCO-D PELCO-P (Options)
Visca Address
1
1
Visca Address
Off
Off
PELCO-P Address
1
1
PELCO-D Address
1
1
Baudrate
9600
9600
9600
9600
9600,
HOME
SET
F1
F2
F3
F4
1
AUTO
MANUAL
FOCUS
ZOOM
2
3
1
2
3
4
5
6
7
8
9
*
8
#
+
_
_
+
4
CAMERA SELECT
SET
PRESET
CLEAR
PRESET
BLC
ON/OFF
MENU
Power
Toggle the camera on and off with the power button. Press and hold for 3 seconds to
place the camera into standby mode.
Number buttons
Used in the selection or creation of camera presets.
Focus
Adjust the focus of the camera using the + and - buttons.
Auto
Switch the camera focus mode to auto.
Manual
Switch the camera focus mode to manual.
Zoom
Zoom in (+) or out (-) using these buttons.
Set Preset
Set the camera into position then press the Set Preset button followed by a number
key (0-9) to set that position to a preset.
Clear Preset
Press clear preset followed by a number key to erase the preset set to that number.
Arrow buttons
Use the arrow buttons to adjust the camera position or navigate within the OSD menu.
Home buttons
Returns the camera to the middle position.
BLC ON/OFF
Toggles backlight compensation on or off.
Menu
Use to pull up the OSD menu.