Panduit Altona Omega AT-OME-SW21-TX-WPC, Руководство по установке

Страница: 3 / 12

3
Installation Guide
AT-OME-SW21-TX-WPC
Faceplate Removal and Assembly
1. Unscrew the four Phillips-head screws from the sides of the faceplate, as shown:
2. Gently remove the faceplate by pulling it toward you.
3. Attach the new faceplate, then secure it using the four Phillips-head screws. Do not over-
tighten or apply high-torque devices to the screws. Doing so may damage the faceplate
and/or the screws.
4. Install the AT-OME-SW21-TX-WPC into the electrical box or mud ring.
5. Reattach the wallplate.
Removal of the faceplate requires that the AT-OME-SW21-TX-WPC be disassembled from the
electrical box or mud ring. A small Phillips-head screwdriver is required to remove the faceplate.
DEVICE
LINK
AT-OME-SW21-TX-WPC
DEVICE
USB-C
HDMI
HOST
LINK
PWR