PANDROL CD200 IQ, Руководство по эксплуатации и обслуживанию

Страница: 16 / 82

16 av 82
OPERATION AND MAINTENANCE MANUAL I ENG_OMM_CD200IQ_P03 I 2023-03-16
@Pandrol 2023
2.7. Minimum Facilities
Clean, dry, covered accommodation for dealing with wheel set, bearings, mechanical hydraulic
and electrical components etc.
• Adequate illumination for inspection of components and under frames.
• Cleaning facilities which will not cause damage to the components.
• Jacking facilities for raising the machine.
•
Handling facilities for removal and refitting of components such as engines.
• Protection from the weather of vulnerable areas of the vehicles and its components.
•
Any specific requirements additional to those listed are identified in the applicable job
description.
• A suitable length of straight level rail track for carrying out brake tests.
2.8. Qualified personnel
Staff competence
Work on the CD200 IQ machine is only to be carried out by qualified personnel, well-informed
and educated in general railway workmanship and specifically in the conditions, standards and
regulations on specific rail track. The machine may only be used for its specified purpose and
only on specified rail types.
In order to carry out this maintenance plan in a manner that will achieve the required safety and
quality, the following minimum level of competence required is:
• For all activities the person leading the task must be able to follow and carry out the
instruction detailed in this document.
• All Safety Critical Work must be carried out by persons competent in accordance with:
1. ORR Railway safety publication 1 “Developing and Maintaining staff competence” March
2007.
2. Duty holders safety critical work competence management system
3. The railways and other guided transport system (safety) Regulations
4.
Staff undertaking this work must have been trained to handle the CD200 IQ