Pando PHV9400, Инструкция по эксплуатации

Страница: 110 / 160

12
EN
Memory Functions
Memory Functions (M1
– M3)
This function is intended to store three separated settings that can be saved and called.
Store a memory
1.
Turn the Function Selector knob (1) and
select the desired function.
2.
Turn the Rotating knob (7) to set the
desired parameters for the selected
function.
3.
Press the Clock key (5) for 5 seconds.
After the 5 seconds the M1 indicator starts
blinking.
4.
Turn the Rotating knob (7) to navigate the
menu and to chose one of the available
memories M1
– M3.
5.
Press the
“OK”
key (4) to validate.
Selecting a stored memory
T
o use one of the stored memories proceed as
follow:
1.
Turn the Function Selector knob (1) to
select the stored memory (M1-M3).
2.
Press the
“start key (3).
Delete a memory
To delete a memory proceed as follows with the
oven in standby mode:
1. Turn the Function Selector knob (1) to
select the stored memory (M1-M3).
2. Press the Clock key (5) for approximately
5 seconds.
3. The right display shows the word
“dEL”.