Cut ur Prize
2
4
How to play
z
Insert a coin to the coin selector or insert cash to the cash acceptor to begin the game;
z
Press the right direction button and operate the scissors move to right .When player move
scissors to the meeting prize and close to the hanging prize loops;
z
Move the scissors to the loops direction ;
z
When scissors reach the loop and loosen button;
z
Cut off loop to get prize.
Hanging prize system notice instruction:
z
It should be adjusted after transport or moving ,pls according the practical circs;
z
Pls do not make some location adjust when the down tube slot without hanging anything;
z
It needs reset machine after adjust the DIP Switch or location;
z
The machine need adjust one time each week;
z
Check all the prize test sensors are normal.
Prize location adjusts procedure:
In the attraction state, press SERVICE button enter the prize location adjustment mode. The crane will
move to before location A1 after enter this mode first time and A1 LED bright. If some error on this
adjustment, press TEST button to the horizontal position ,the LED display 1-- A1 means prize at the
horizontal position .Press back button the crane will move to left and press right button to right. Press
TEST button again, enter the upright position adjustment, the LED display 1||,it means A1 in the upright
adjust mode and press back and right to move crane. Press SERVICE button to change the prize position,
the ordinal serial A2 B1 B2 C1 C2 .In the C2 mode press SERVICE button to quit position adjust mode.
5
TECHNICAL PARAMETERS
Mode: TR1103
Location requirements: Temperature –10
℃
~+40
℃
, U.V. radiation Very low, humidity low, Vibrations
level: low
Dimension:
930mm× 960mm × 1910mm
Weight: 150KG
Power Supply: 220VAC
MAX Power : 250W
Player: 1 Player
PANDA
VENDING
LIMITED
