PANCONTROL PAN Feuchtemesser, Руководство пользователя

Страница: 9 / 11

English
9
8. Operating Instructions
•
Be aware of the Safety Instructions. (Chapter 3)
•
Always switch OFF the device when it is not in use.
•
Always keep the appliance clean and dry. - Avoid dirt between the
measuring tips.
Temperature
With the function key MODE (5) you switch between °C and °F
(Press and hold 2 Second(s))
Backlight
To switch the backlight on or off, briefly press the main switch (4).
Auto power off
If no further measurements are carried out, the device switches off
automatically after 2 minutes.
By simultaneously pressing the MODE key (5) and the main switch (4), the
automatic shutdown is disabled.
(Press the main switch for two seconds - the unit switches off.)
Moisture measurement
Remove the protective cap and plug it into the underside of the appliance.
The unit will turn on automatically. (When the device is switched on, the last
valid settings are retained.)
When the protective cap is closed, the unit is switched off again.
1.
Briefly press the MODE key to switch between the measurement of wood
and masonry.
2. Always measure in wood only transverse, not parallel, to the fiber
structure.
3. Push the measuring tips as deep as possible into the material.
4. Once the reading stabilizes, read the value.
5. Several measurements provide representative data.