PANCONTROL PAN 147, Руководство пользователя

Страница: 28 / 254

EN 10
8. Operating Instructions
Set the rotary switch to the selected range prior measuring. In case of changing
the function or range please remove the test leads (or the clamp) from any source
of voltage.
Note : Due to the high sensitivity the reading sometimes shows random values
if the test leads are not connected to any signal. The reading stabilizes when
the test leads are connected to the circuit to be tested.
Devices like welding transformer, car ignition system, etc. could produce stray
electromagnetic fields which could adulterate the result of a measurement.
DC Voltage measurement / AC Voltage measurement
(TRUE RMS)
Use the provided test leads to perform these measurements.
Attention: Avoid voltage measuring in electrical circuits while motors are
switched on or off. The stress ‐ spikes can damage the instrument.
1. Set the rotary switch to the V ‐ Position.
2.
Attach the pin ‐ plug of the black test lead to the COM ‐ jack and the pin ‐ plug of
the red test lead to the V ‐ , A ‐ , Ω‐ jack.
3.
Connect the black test prod to the negative pole and the red test prod to the
positive pole of the circuit to be tested.
4.
Once the reading stabilizes, read the value. If the polarity is twisted a "Minus
sign" is displayed. Use the HOLD function if the reading is difficult to read.