INCREASING / DECREASING VOLUME
1)
While on a call, press the up or down arrow on the
SCROLL
button
(large silver button in the center of the phone).
2)
During a speakerphone call the speaker volume will alter.
3)
During a handset call the handset volume will alter.
RAISING / LOWERING RINGER LEVEL
1)
Do not press the
TALK
button.
2)
Press the up or down arrow on the
SCROLL
button (large silver button in
the center of the phone).
3)
Ringer volume will increase or decrease. Ringer can be turned off by this
method as well. As you continue to press the down arrow, the phone will
enter a vibration mode (no ring, just vibrate). An additional press of the
down arrow button results in a meeting mode (see manual for details).
Finally, if the down arrow button is pressed and held for a few seconds in
meeting mode, the phone will enter a privacy mode during which it will
no longer ring or vibrate.
MAKING AN ALL-PAGE
1)
Press the
INFO
button repeatedly until the word PGE (Page) is displayed.
2)
Press the button below the word PGE.
3)
Make an all page.
ANSWERING AN ALL-PAGE
1)
While a person is making an all-page:
2)
Press the INFO button repeatedly until the word ANS (Answer) is
displayed.
3)
Press the button below the word ANS
4)
You will be connected to the person making the all page.
REDIAL
1)
Press the
TALK
button.
2)
Press the left arrow on the
SCROLL
button.
3)
The phone will redial the last number.
CALL WAITING
1)
While on a call, press the
FUNC
button.
2)
Dial 3 to select Flash (note the word FLASH in white next to the digit 3).
3)
Speak to second caller.
4)
Repeat procedure to return to original caller (or simply wait for the phone
company to reconnect you to caller).
BARGING IN ON A CALL
3)
Press the
TALK
button.
4)
Press the desired line button that is presently in use.
5)
A busy signal will be heard to indicate that someone is using the line.
6)
Dial the digit “
3
”.
7)
You will now join the conversation.
8)
If the other person in the house intends to hang up and leave you
connected to the caller, ask them to press the
TRANSFER
button first.
