D I G I T A L S I G N A L P R O C E S S O R S
Model No.
WZ-DE45NH
I
nput
No. of Channels
2 ch
Analog
Type
Electronic balance
Rated Input
+4 dB
Maximum Input
+24 dB or more
Connector
XLR-3-31 or equivalent, x2
Input Impedance
20 k
Ω
In-Phase Reject Ratio
40 dB or more
A/D Converter
24-bit
∆
-
∑
type
Digital
Type
AES/EBU format, for professional use
Sampling Frequency
48 kHz±0.1%
Connector
XLR-3-31 or equivalent, 1 connector
Output
No. of Channels
2 ch
Analog
Type
Electronic balance
Rated Output
+4 dB±1 dB
Maximum Output
+24 dB or more (at 10 k
Ω
load)
Output Impedance
150
Ω
Connector
XLR-3-32 or equivalent, 4 connectors
Applicable Load Impedance
600
Ω
or more
D/A Converter
24-bit
∆
-
∑
type
Digital
Type
AES/EBU format, for professional use
Sampling Frequency
48 kHz
Connector
XLR-3-31 or equivalent, 1 connector
(Recommended cable: Canare Electric DA206 or equivalent)
Pattern Type
Make contact type, No. of control patterns: 12 + MUTE, BYPASS
Control
Anti-reverse diode provided
Connector
D-SUB 15-pin, setscrew M2.6
Recommended connectors
Male: OMRON XM2A-1501 or equivalent
Hood: OMRON XM2S-1511 or equivalent
Power Supply
AC220V
~
~AC240V 50/60 Hz
Power Consumption
16 W (as defined in the Electrical Appliances Control Act)
Heat Flow
16 W (12 kcal)
* The figure in parentheses is calorific value per hour.
Stacking Conditions
2 units high maximum
* If you are using 3 units or more, leave a space for a unit or more every 2 units.
Dimensions
480 (W) x 44 (H) x 280 (D) mm (without rubber feet)
Weight (approx.)
4.5 kg
Note: "RAMSA-NET" is a protocol exclusive to Matsushita Communication Industrial Co., Ltd.,
used to send and receive data between the host computer and two or more audio control units
connected to it with communication lines.
General Frequency Response
20 to 20,000 Hz, +0.5, –1.0 dB
Dynamic Range
Analog input/output (typ, IHF-A)
115 dB (noise gate ON)
109 dB (noise gate OFF)
THD
0.015% at +4 dB, 20 to 20,000 Hz, 30 kHz LPF (at 600
Ω
load)
Crosstalk
–70 dB or less (10 kHz)
User Memory
16 me 1 simple memory
External Type
RS-485 RAMSA-NET (See Note.)
Control Connector
D-SUB 9-pin, IN/OUT 1 each, setscrew M2.6
Recommended connectors
Male: OMRON XM2A-0901 or equivalent
Female: OMRON XM2D-0901 or equivalent
Hood: OMRON XM2S-0911 or equivalent
Unit : mm
44
32
480
465
275
5
Digital Multi Equalizer
WZ-DE45NH
•
2 inputs and 2 outputs.
•
6 functions: Graphic equalizer function, parametric
equalizer function, delay function, notch filter function,
compressor/limiter function and noise gate function.
•
Built-in a digital audio interface and conforms to the
AES/EBU format.
•
24-bit A/D and D/A converters are employed for analog
inputs and outputs to offer a dynamic range close to that
of an analog device.
•
The notch filter can be automatically set to match the
sound field.
•
All settings can be saved in up to 16 patterns in the
memory.
SPECIFICATIONS
Dimensions
GEQ
PEQ
NOTCH
GATE
COMP
BLOCK
Rear Panel
PUBLIC ADDRESS
RAMSA
