Antenna location
34
X
Floor settings ([Steps settings])
Normally, use the system with the default settings.
[Reference antenna on floor directly below]: Select this when there is a reference antenna on the floor directly
below.
[No reference antenna on floor directly below]: Select this when there is no reference antenna on floor directly below.
[Reference antenna on floor directly above]: Select this when there is a reference antenna on floor directly above.
[No reference antenna on floor directly above]: Select this when there is no reference antenna on the floor directly
above.
Default settings:
[No reference antenna on floor directly below] /
[No reference antenna on floor directly above]
If you select [Reference antenna on floor directly below (above)], the antenna placement analysis is made by calculating
the influence from the reference antenna(s) from above and/or below floor(s). For example, if there is a reference
antenna of a WX-SR200P system with a large field selection installed on the floor above, set [Reference antenna on
floor directly above]. Furthermore, also set [Reference antenna on floor directly below (above)], for performing tests if
there are difficult conditions such as when you think there will be influence from an antenna on the floor above or below
due to an atrium space or you when think there will be influence from an adjacent building.
X
[Delete]
Delete an antenna.
memo
Important
●
After clicking to select the target antenna, you can also change the antenna settings from [Antenna
settings] in the menu.
