17
• When [OTHER] is lit
Adjust the volume of another microphone (Refer to the table in this page.)
• When [LINE] is lit
Adjust the volume of the external device (CD player or MD player) that is connected to
the line input connector of the receiver that receives the audio from the microphone.
The line volume adjusting function is available with the infrared receiver/amplifier (WX-
LA50) and the infrared wireless powered speaker (WX-LP100). (as of June 2009)
Note:
• The adjusted volume can be reset by turning off the power switch of the receiver.
It is not reset by turning off the power of the microphone.
• While the microphone is muted, volume control of the [OWN] microphone is disabled but
enabled for [OTHER] and [LINE]. (
☞
page 18)
• The table below shows the relation between the [OWN] and [OTHER] infrared wireless
microphones targeted for volume control.
WX-LT350
CH1
CH2
CH3
CH4
Receiving
channels
Transmitting
channels
WX-LR100/A, WX-LA20,
WX-LA50, WX-LP100
WX-LR100,
WX-LR100/B
CH1
OWN
OTHER
–
–
OTHER
OWN
–
–
CH2
CH3
–
–
OWN
OTHER
CH4
–
–
OTHER
OWN
• The volume control function may become disabled under certain circumstances.
(
☞
page 12)
