[Max bit rate (per client)*]
Select an H.265 (or H.264) bit rate per a client from the following.
64kbps/ 128kbps*/ 256kbps*/ 384kbps*/ 512kbps*/ 768kbps*/ 1024kbps*/ 1536kbps*/ 2048kbps*/ 3072kbps*/
4096kbps*/ 6144kbps*/ 8192kbps*/ 10240kbps*/ 12288kbps*/ 14336kbps*/ 16384kbps*/ 20480kbps*/
24576kbps*
•
Default:
–
Stream(1): 3072kbps*
X6531
/ 2048kbps*
X6511
–
Stream(2): 1536kbps*
–
Stream(3): 1024kbps*
–
Stream(4): 1024kbps*
* The range of bit rates that can be configured for H.265 (or H.264) bit rates differs depending on the
“Transmission priority” and “Image capture size”.
When “Constant bit rate”, “Frame rate”, or “Best effort” is selected for “Transmission priority”
•
QVGA, 400x300, VGA, 320x180, and 640x360: 64kbps - 4096kbps*
•
800x600: 128kbps* - 4096kbps*
•
1280x960 and 1280x720
: 256kbps* - 8192kbps*
•
: 512kbps* - 12288kbps*
X6531
•
2048x1536: 1024kbps* - 16384kbps*
X6531
When “VBR” is selected for “Transmission priority”
•
: 64kbps - 12288kbps*
•
800x600: 128kbps* - 12288kbps*
•
1280x960 and 1280x720
: 256kbps* - 12288kbps*
•
: 512kbps* - 24576kbps*
X6531
•
2048x1536: 1024kbps* - 24576kbps*
X6531
*1
When 60fps mode is selected, settings up until 24576kbps can be configured.
Note
•
The bit rate for “Stream” is restricted by “Bandwidth control(bit rate)” on the [Network] tab on the
“Network” page (
page 180). When a value with “*” attached is set, images may not be streamed.
[Image quality]
Select the image quality of H.265 (or H.264) images from the following.
•
For “Constant bit rate”, “Frame rate”, and “Best effort”:
Motion priority/Normal/Quality priority
•
“VBR”:
0 Super fine/ 1 Fine/ 2/ 3/ 4/ 5 Normal/ 6/ 7/ 8/ 9 Low
•
Default:
5 Normal
[Smart Coding] - [GOP control]
By using “GOP control”, the transmission data volume can be reduced when there is little motion in the image.
•
Off/On(Low)/On(Mid)/On(Advanced)
•
Default:
Off
Note
•
The available items differ depending on the “Stream encoding format” and “Transmission priority”.
•
When using “GOP control”, the refresh interval is increased when streaming H.265 (or H.264) images.
For this reason, do not use it when the network environment has frequent errors.
•
During pan/ tilt/ zoom/ focus operation, the effect of the smart coding may not be obtained.
Operating Instructions
101
2 Settings
Содержание WV-X6511N
