![background image](http://html2.mh-extra.com/html/panasonic/wv-sw598/wv-sw598_operating-instructions-manual_4719029012.webp)
–
when the subject passes by other moving objects
–
when the target moves too fast or too slow
–
when the camera is shaking
•
When the zoom ratio is set to the “Tele” side, it may be difficult to obtain accuracy with the auto
tracking function. It is recommended to use the auto tracking function with setting the zoom
ratio to the “Wide” side.
•
During auto tracking, if the camera is operated using the control pad or by other methods, or if
an alarm occurs, auto tracking is stopped.
•
Auto pan:
Automatically pans between the start position and the end position set in advance
(
®
page 109).
Even when the camera is operated for zooming or focusing, the camera continues panning.
(However, panning will stop when the zoom button (x1) is clicked.)
•
Preset sequence:
Automatically moves to the preset positions (
®
page 106) orderly (start from the
lowest preset position number).
•
360 map-shot:
Moves 45° horizontally at a time and repeats 8 times to shoot images of each 45°
position (45° x 8 = 360°), and then displays 8 thumbnail images of each 45° position (45° x 8 = 360°)
on a newly opened window. When a thumbnail image is clicked, the camera moves to the respective
position and live images will be displayed on the “Live” page.
•
Preset map-shot:
8 thumbnail images of the preset position 1-8 (
®
page 106) will be displayed orderly
on a newly displayed window. When a thumbnail image is clicked, the camera moves to the respective
position and live images will be displayed on the “Live” page.
Note
•
Do not operate the browser until all the thumbnail images are displayed and the camera returns to
the original position (where the camera was when “360 map-shot” or “Preset map-shot” was carried
out).
•
When “360 map-shot” is carried out while the camera is moving (panning/tilting), images captured
while panning/tilting may be displayed as the thumbnail display. In this case, stop the current
operation and carry out “360 map-shot” again.
•
When “Preset map-shot” is carried out with an unregistered preset position (among preset position
1-8), the thumbnail image of the preset position before the unregistered preset position will be
displayed.
In this case, the camera will not move when the thumbnail image is clicked.
•
The camera will not always return to the exactly same position where it was before “360
map-shot” or “Preset map-shot” was carried out. (It may sometimes be slightly different.)
•
The window on which the thumbnail images are displayed will close when clicking the following
buttons that can switch the camera channel or reload images: [Live], [Multi-screen], [H.264],
[JPEG], [Stream], [Image capture size], [Image quality], [Setup].
To display the thumbnail images again, carry out “360 map-shot” or “Preset map-shot” again.
•
Patrol 1-4:
Performs patrols 1-4 that were set in advance. (
®
page 111)
Control pad/buttons
*2
Left-click on the control pad or buttons to adjust the horizontal/vertical position of the camera (panning/
tilting). Panning/tilting speed will be faster if a clicked point gets farther from the center point of the control
pad. When the tilt reaches a certain angle, the image is automatically turned upside-down (digital flip
function).
It is also possible to pan/tilt the camera by dragging the mouse.
Zoom and focus can be adjusted by right-clicking. When an upper/lower area of the control pad is
right-clicked, the displayed image will be zoomed in/out on. When a left/right area is right-clicked, the focus
will be adjusted to the Near/Far side.
Zoom can also be adjusted using the mouse wheel.
[Brightness] buttons
*2
Available range: 0 - 255
12
Operating Instructions
1 Monitor images on a PC
Содержание WV-SW598
