![background image](http://html1.mh-extra.com/html/panasonic/wv-sw396a/wv-sw396a_installation-manual_4173882028.webp)
When connecting to a network using a PoE+ hub
* When connecting to a network using a PoE+ hub when the temperature is –30 °C {–22 °F} or less, use a 24 V AC
power supply.
<Required cable>
LAN cable (category 5e or better, straight, STP*)
* For Europe
Important:
• The video monitor is used for checking the adjustment of the angular field of view when installing the camera or when
servicing. It is not provided for recording/monitoring use.
• Depending on the monitor, some characters (camera title, preset ID, etc.) may not be displayed on the screen.
• Use a switching hub or a router which is compliant with 10BASE-T/100BASE-TX or better. (When supplying the power
to a hub or router, apply PoE+ (IEEE802.3at compliant).) It is impossible to supply the power to this product from a
PoE hub or router that is compliant with IEEE802.3af standard.
• If a PoE+ device (hub) is not used, each network camera must be connected to a power supply.
• When using 24 V AC, power supply from a PoE (or PoE+) hub or router is not required.
Hub, router
PoE+ (IEEE802.3at compliant) is applied when the power is supplied.
PC
LAN cable (category 5e or
better, straight, STP*)
LAN cable (category 5e or
better, straight, STP*)
LAN cable (category 5e or
better, straight, STP*)
Video monitor
(for adjustment use only)
Video monitor
(for adjustment use only)
Powered speaker (option)
Powered speaker (option)
Plug-in power type
microphone (option)
Plug-in power type
microphone (option)
To the power supply
(24 V AC)
To the power supply
(24 V AC)
RJ-45 female connector
(cable integrated type)
RJ-45 female connector
(cable integrated type)
28