manualshive.com logo in svg
background image

2

The  model  number  and  serial  number  of  this 

product  may  be  found  on  the  surface  of  the 

unit.

You  should  note  the  model  number  and  serial 

number  of  this  unit  in  the  space  provided  and 

retain this book as a permanent record of your 

purchase  to  aid  identification  in  the  event  of 

theft.

 

Model No. 

 

Serial No.

NOTE:  This  equipment  has  been  tested  and 

found to comply with the limits for a Class A digi-

tal device, pursuant to Part 15 of the FCC Rules. 

These  limits  are  designed  to  provide  reasonable 

protection against harmful interference when the 

equipment  is  operated  in  a  commercial  environ-

ment.  This  equipment  generates,  uses,  and  can 

radiate  radio  frequency  energy  and,  if  not 

installed  and  used  in  accordance  with  the 

instruction  manual,  may  cause  harmful  interfer-

ence to radio communications.

Operation of this equipment in a residential area 

is  likely  to  cause  harmful  interference  in  which 

case the user will be required to correct the inter-

ference at his own expense.

FCC  Caution:  To  assure  continued  compliance, 

(example  -  use  only  shielded  interface  cables 

when  connecting  to  computer  or  peripheral 

devices).  Any  changes  or  modifications  not 

expressly  approved  by  the  party  responsible  for 

compliance  could  void  the  user’s  authority  to 

operate this equipment.

For U.S.A.

For U.S.A.

CAN ICES-3(A)/NMB-3(A)

For Canada

We declare under our sole responsibility that the product 

to which this declaration relates is in conformity with the 

standard  or  other  normative  document  following  the 

provisions of Directive 2004/108/EC.
Wir  erklären  in  alleiniger  Verantwortung,  daß  das 

Produkt,  auf  das  sich  diese  Erklärung  bezieht,  mit  der 

folgenden 

Norm 

oder 

normativen 

Dokument 

übereinstimmt. Gemäß den Bestimmungen der Richtlinie 

2004/108/EC.
Nous  déclarons  sous  notre  propre  responsabilité  que  le 

produit  auquel  se  réfère  la  présente  déclaration  est 

conforme á la norme spécifiée ou à tout autre document 

normatif  conformément  aux  dispositions  de  la  directive 

2004/108/CE.
Nosotros declaramos bajo nuestra única responsabilidad 

que  el  producto  a  que  hace  referencia  esta  declaración 

está conforme con la norma u otro documento normativo 

siguiendo las estipulaciones de la directiva 2004/108/CE.
Noi dichiariamo sotto nostra esclusiva responsabilità che 

il  prodotto  a  cui  si  riferisce  la  presente  dichiarazione 

risulta conforme al seguente standard o altro documento 

normativo  conforme  alle  disposizioni  della  direttiva 

2004/108/CE.
Wij  verklaren  als  enige  aansprakelijke,  dat  het  product 

waarop deze verklaring betrekking heeft, voldoet aan de 

volgende  norm  of  ander  normatief  dokument, 

overeenkomstig  de  bepalingen  van  Richtlijn  2004/108/

EC.
Vi  erklærer  os  eneansvarlige  for,  at  dette  produkt,  som 

denne  deklaration  omhandler,  er  i  overensstemmelse 

med  standard  eller  andre  normative  dokumenter  i  følge 

bestemmelserne i direktiv 2004/108/EC.
Vi deklarerar härmed vårt fulla ansvar för att den produkt 

till 

vilken 

denna 

deklaration 

hänvisar 

är 

överensstämmelse  med  standarddokument  eller  annat 

normativt  dokument  som  framställs  i  direktiv  2004/108/

EC.
Ilmoitamme yksinomaisella vastuullamme, että tuote, jota 

tämä  ilmoitus  koskee,  noudattaa  seuraavaa  standardia 

tai  muuta  ohjeellista  asiakirjaa,  jotka  noudattavat 

direktiivin 2004/108/EC säädöksiä.
Vi  erklærer  oss  alene  ansvarlige  for  at  produktet  som 

denne  erklæringen  gjelder  for,  er  i  overensstemmelse 

med følgende norm eller andre normgivende dokumenter 

som følger bestemmelsene i direktiv 2004/108/EC.

For Europe

Содержание WV-SPN6R481

















Отзывы: