![background image](http://html1.mh-extra.com/html/panasonic/wv-sfv310a/wv-sfv310a_operating-instructions-manual_4718966094.webp)
Note
•
“Intensity control” is only available when “On” or “Auto2(IR Light)” is selected for “Day & Night(IR)”, and
“Off” is selected for “Super Dynamic”.
•
When “On” is selected for “Intensity control” and there is a bright part in an image, the entire image
may be made darker. In this case, if you select “Off” for “Intensity control”, the image will become
brighter.
[White balance]
Select a method of white balance adjustment from the following.
White color can be adjusted by “Red gain” and “Blue gain”.
•
ATW1:
Selects the automatic tracing white balance mode. The camera will constantly check the color
temperature of the light source and adjust the white balance automatically. Operating color temperature
range is approx. 2,700 K to 6,000 K.
•
ATW2:
Selects the automatic tracing white balance mode under a sodium lamp. The camera will adjust
the white balance automatically under a sodium lamp. Operating color temperature range is approx. 2,000
K to 6,000 K.
•
AWC:
Selects the automatic white balance control mode. This adjustment is suitable for a location where
a light source is stable. Operating color temperature range is approx. 2,000 K to 10,000 K.
•
Default:
ATW1
Note
•
Under the following conditions, color may not be faithfully processed. In these cases, select “AWC”.
–
When shooting a subject whose major part is a thick color
–
When shooting blue sky or sun at sunset
–
When shooting a subject whose luminance is too low
•
When “AWC” is selected, click the [Set] button.
[Red gain]
Adjust the red color of images.
When the cursor is moved in the “+” direction, the red color will become thicker. When the cursor is moved in
the “-” direction, the red color will be thinner. Click the [Reset] button to reset the color to the default.
•
Default:
128
[Blue gain]
Adjust the blue color of images.
When the cursor is moved in the “+” direction, the blue color will become thicker. When the cursor is moved
in the “-” direction, the blue color will be thinner. Click the [Reset] button to reset the color to the default.
•
Default:
128
[DNR]
The digital noise reduction function reduces noise automatically under the condition of low illuminance. Select
an effect level “High” or “Low” for the digital noise reduction.
•
High:
High DNR, increases afterimage
•
Low:
Low DNR, reduces afterimage
•
Default:
High
[Chroma gain level]
Adjusts the chroma level (color density).
When the cursor is moved in the “+” direction, the colors will become thicker. When the cursor is moved in the
“-” direction, the colors will be thinner. Click the [Reset] button to reset the color to the default.
•
Default:
128
94
Operating Instructions
11 Configure the settings relating to images and audio [Image/Audio]
Содержание WV-SFV310A
Страница 7: ...22 Directory structure of drive B 221 Operating Instructions 7 Table of Contents...
Страница 88: ...88 Operating Instructions 11 Configure the settings relating to images and audio Image Audio...
Страница 177: ...8 Click Next 9 Click Finish Operating Instructions 177 16 Configuring the network settings Network...
Страница 205: ...When using a firewall including software allow access to all UDP ports Operating Instructions 205 19 Using the CD ROM...